*(Coauthored with Ramana Kumar and cross-posted from the Alignment Forum.)*

There are a few different classifications of safety problems, including the Specification, Robustness and Assurance (SRA) taxonomy and the Goodhart’s Law taxonomy. In SRA, the specification category is about defining the purpose of the system, i.e. specifying its incentives. Since incentive problems can be seen as manifestations of Goodhart’s Law, we explore how the specification category of the SRA taxonomy maps to the Goodhart taxonomy. The mapping is an attempt to integrate different breakdowns of the safety problem space into a coherent whole. We hope that a consistent classification of current safety problems will help develop solutions that are effective for entire classes of problems, including future problems that have not yet been identified.

The SRA taxonomy defines three different types of specifications of the agent’s objective: ideal (a perfect description of the wishes of the human designer), design (the stated objective of the agent) and revealed (the objective recovered from the agent’s behavior). It then divides specification problems into **design** problems (e.g. side effects) that correspond to a difference between the ideal and design specifications, and **emergent** problems (e.g. tampering) that correspond to a difference between the design and revealed specifications.

In the Goodhart taxonomy, there is a variable U* representing the true objective, and a variable U representing the proxy for the objective (e.g. a reward function). The taxonomy identifies four types of Goodhart effects: **regressional** (maximizing U also selects for the difference between U and U*), **extremal** (maximizing U takes the agent outside the region where U and U* are correlated), **causal** (the agent intervenes to maximize U in a way that does not affect U*), and **adversarial** (the agent has a different goal W and exploits the proxy U to maximize W).

We think there is a correspondence between these taxonomies: design problems are regressional and extremal Goodhart effects, while emergent problems are causal Goodhart effects. The rest of this post will explain and refine this correspondence.

The SRA taxonomy needs to be refined in order to capture the distinction between regressional and extremal Goodhart effects, and to pinpoint the source of causal Goodhart effects. To this end, we add a **model** specification as an intermediate point between the ideal and design specifications, and an **implementation** specification between the design and revealed specifications.

The **model** specification is the best proxy within a chosen formalism (e.g. model class or specification language), i.e. the proxy that most closely approximates the ideal specification. In a reinforcement learning setting, the model specification is the reward function (defined in the given MDP/R over the given state space) that best captures the human designer’s preferences.

- The ideal-model gap corresponds to the
**model design**problem (regressional Goodhart): choosing a model that is tractable but also expressive enough to approximate the ideal specification well. - The model-design gap corresponds to
**proxy design**problems (extremal Goodhart), such as specification gaming and side effects.

While the design specification is a high-level description of what should be executed by the system, the **implementation** specification is a specification that can be executed, which includes agent and environment code (e.g. an executable Linux binary). (We note that it is also possible to define other specification levels at intermediate levels of abstraction between design and implementation, e.g. using pseudocode rather than executable code.)

- The design-implementation gap corresponds to
**tampering**problems (causal Goodhart), since they exploit implementation flaws (such as bugs that allow the agent to overwrite the reward). (Note that tampering problems are referred to as wireheading and delusions in the SRA.) - The implementation-revealed gap corresponds to robustness problems in the SRA (e.g. unsafe exploration).

In the **model design** problem, U is the best approximation of U* within the given model. As long as the global maximum M for U is not exactly the same as the global maximum M* for U*, the agent will not find M*. This corresponds to regressional Goodhart: selecting for U will also select for the difference between U and U*, so the optimization process will overfit to U at the expense of U*.

In **proxy** **design** problems, U and U* are correlated under normal circumstances, but the correlation breaks in situations when U is maximized, which is an extremal Goodhart effect. The proxy U is often designed to approximate U* by having a maximum at a global maximum M* of U*. Different ways that this approximation fails produce different problems.

- In specification gaming problems, M* turns out to be a local (rather than global) maximum for U, e.g. if M* is the strategy of following the racetrack in the boat race game. The agent finds the global maximum M for U, e.g. the strategy of going in circles and repeatedly hitting the same reward blocks. This is an extrapolation of the reward function outside the training domain that it was designed for, so the correlation with the true objective no longer holds. This is an extremal Goodhart effect due to regime change.

- In side effect problems, M* is a global maximum for U, but U incorrectly approximates U* by being flat in certain dimensions (corresponding to indifference to certain variables, e.g. whether a vase is broken). Then the set of global maxima for U is much larger than the set of global maxima for U*, and most points in that set are not global maxima for U*. Maximizing U can take the agent into a region where U doesn’t match U*, and the agent finds a point M that is also a global maximum for U, but not a global maximum for U*. This is an extremal Goodhart effect due to model insufficiency.

Current solutions to proxy design problems involve taking the proxy less literally: by injecting uncertainty (e.g. quantilization), avoiding extrapolation (e.g. inverse reward design), or adding a term for omitted preferences (e.g. impact measures).

In **tampering **problems, we have a causal link U* -> U. Tampering occurs when the agent intervenes on some variable W that has a causal effect on U that does not involve U*, which is a causal Goodhart effect. W could be the reward function parameters, the human feedback data (in reward learning), the observation function parameters (in a POMDP), or the status of the shutdown button. The overall structure is U* -> U <- W.

For example, in the Rocks & Diamonds environment, U* is the number of diamonds delivered by the agent to the goal area. Intervening on the reward function to make it reward rocks increases the reward U without increasing U* (the number of diamonds delivered).

Current solutions to tampering problems involve modifying the causal graph to remove the tampering incentives, e.g. by using approval-direction or introducing counterfactual variables.

Mesa-optimization is also a causal Goodhart effect, if considered as a specification problem for the main agent from the human designer’s perspective. We can put it in the same framework by defining W as the mesa-optimizer’s objective. By selecting for the mesa-optimizer, the base agent ‘intervenes’ on W in a way that increases its own reward U, but not necessarily the true reward U*. However, when we consider this problem one level down, as a specification problem for the mesa-optimizer from the main agent’s perspective, it can take the form of any of the four Goodhart effects. The four types of alignment problems in the mesa-optimization paper can be mapped to the four types of Goodhart’s Law as follows: approximate alignment is regressional, side effect alignment is extremal, instrumental alignment is causal, and deceptive alignment is adversarial.

This correspondence is consistent with the connection between the Goodhart taxonomy and the **selection vs control** distinction, where regressional and extremal Goodhart are more relevant for selection, while causal Goodhart is more relevant for control. The design specification is generated by a selection process, while the revealed specification is generated by a control process. Thus, design problems represent difficulties with selection, while emergent problems represent difficulties with control.

Putting it all together:

In terms of the limitations of this mapping, we are not sure about model specification being the dividing line between regressional and extremal Goodhart. For example, a poor choice of model specification could deviate from the ideal specification in systematic ways that result in extremal Goodhart effects. It is also unclear how adversarial Goodhart fits into this mapping. Since an adversary can exploit any differences between U* and U (taking advantage of the other three types of Goodhart effects) it seems that adversarial Goodhart effects can happen anywhere in the ideal-implementation gap.

We hope that you find the mapping useful for your thinking about the safety problem space, and welcome your feedback and comments. We are particularly interested if you think some of the correspondences in this post are wrong.

*(Thanks to Jan Leike and Tom Everitt for their helpful feedback on this post.)*

antlerboy - Benjamin P TaylorReblogged this on Systems Community of Inquiry.

LikeLike